Ordered the kit as an introduction to M&K, The case I got is a bit smaller than the picture on the site, doesn't have the nice preformed spaces for the bottles and wax, but John told me he is gonna look into that, Nonetheless everything, including the spray nozzles and dispenser caps, still fits inside. The quality of the flight case is pretty decent as it comes with firm padding all around the inside, rubber foots on the underside and on the hinge side, a handle locks an engraved plate with your name and date of birth. I'm pretty happy with the case and comes with me on long trips or to people who needs help with there car. Unfortunately I didn't get the 2x 600gsm microfibre yet because they where out of stock but I bet they are great cloths. I'm also very pleased with the back and forth mailing with John for asking to confirm that the liquids I ordered where indeed the right ones.
My car is well maintained but after I used Pure I noticed that the paint work wasn't that clean like I tough it was. A good cleaner that doesn't smell like ur using some type of fuel and get tiered of the smell after 10 minutes, Worked it in on an old clean polishing pad by hand and worked just fine, remoael is also very easy and the paintworks feels smooth. Not much is needed so that's always good. Never used M&K before, now I must use it!
It's very easy to appliy with a microfibre pad once primed with the product. I did the whole car in one go, let it cure for an hour or so and buffed off clean with one swipe of the cloth. It showed a streak free, glass like finish underneath and felt silky smooth, great product and not much is needed at all.
Applied it on my BMW F30 Tansanit Blau wich has amazing flakes and glitter. You feel imediately the wax is on the hard side due to the high carnuba content and makes it a bit difficut to lay it thin, which is highly recomended. I'm not used to this quality of wax and alowing it to cure for aprox 20 min is also new for me and struggeld a bit on the first panels, once I got used to this type of application it went pretty smooth. The results afterwards looked more than good, glossy and a rich deep color and lustre.
My Subaru is a two year old blue Forester. This wax really bring my car with super thick gloss and strong feeling of coating on top of the thin paint. Just need to be careful to give this wax enough curin time before removal. Spritz with QD will make the application easier~.
I'm verry pleased with the way John helped me, I was looking for a suitable wax for my vehicle's type paint, immediatelly John came up with "that wax" of all the waxes M&K provides, wich tells me he knows his stuff and can only be achieved if it's your passion. Looking at some interesting liquids I ended up buying the Stelvio kit. Once the order was complete the delivery took place over the course of 3 days from Scotland to Belgium. When opening the box it breaths exclusivity and make you feel you're not just a number, a specialy made nametag, a handwritten thank you card, lovely! I'm verry pleased how everything went and with first contact with John you feel that this isnt't your ordanary webshop! I can and will recomend M&K to every one!!
Atomic is so easy to apply gives good depth of gloss. From someone who applies ceramic coatings all the time,this is easy to apply for the home user. Longevity remains to be seen but results so far are very good
The increase in depth of shine is totally out of proportion to the effort required to achieve it ! I applied if on top of wax, that had already achieved a great gloss that I was satisfied with, to the extent I didn't think Glace could improve it any further. How wrong I was ! I also use it as a quick detailer to remove any water marks after rinsing. Absolutely awesome product !
Finally got a chance to use Bavaria. It's as easy to use as eating a Lemon Meringue Pie! Water behaviour is awesome and it comes off clean (no oily residue at all - used a swirl light to check). Finish is awesome and safe on trim. As always exemplary service from John again. Can't fault the company or his products. Thanks John. Buy some quick, is all I can say.
Pure is a pleasure to use. Spreads and works smoothly and effortlessly, as well as being easily removed prior to subsequent layers. I use Pure for previous product removal and deep clean without another IPA wipe-down, and it leaves a very clean surface which feels free of any residual oils which could affect further sealant or wax. Dust free which is a bonus.
This pre wax sealant is a pleasure to use. Easy on and off, and is one of the products which really does make a difference to both the appearance, and surface feel for wax application. Leaves a glass like deep crystal resin and a small quantity goes a long way.
This QD is a touch of class. The smell is luxurious and the streak free finish is a pleasure to work with. Used primarily to spritz any MF before product removal or buffing. The fine mist head is also clean to use with no dripping.
Used as a high gloss LSP on top of a hybrid carnauba wax, or on its own atop Titan. This is a very oily wax, and suits very thin application and longer than usual (~1 hr) initial cure before removal. Spritz curing for faster removal didn't seem to work with this wax, and removal too soon will remove the entire product. I also wait 24hrs before a top up second coat. The wax will not haze dry, so a finger swipe will never leave gloss underneath, but carnauba will remain after removal of the partially cured surface.
The finish is glass like gloss with clarity, very like a dedicated show wax, and I can't comment on longevity as it's not long applied (I usually wax again before any LSP has had a chance to degrade). Beading is great, and the surface is so hydrophobic that sheeting will occur with beads rolling off any incline rather than sticking around. Smells fresh, like a citrus LUX soap.